Overview Features Instructions Performance Forum Downloads Products OrderV4 Contact

Welcome to the Apollo Forum

This forum is for people interested in the APOLLO CPU.
Please read the forum usage manual.



All TopicsNewsPerformanceGamesDemosApolloVampireAROSWorkbenchATARIReleases

Update Gold 2.12 On My V600 V2

Giuseppe Marra

Posts 14
25 Nov 2020 16:54


Hello together,

I'm trying to update my V600 over USB Blaster to the Gold 2.12.
It will always stop at 12%. I really don't know what i'doing wrong.
Help me pls.
It's all connected well.
Here the log from Quartus
Info (209016): Configuring device index 1
Info (209017): Device 1 contains JTAG ID code 0x020F40DD
Info (209007): Configuration succeeded -- 1 device(s) configured
Info (209018): Device 1 silicon ID is 0x14
Info (209044): Erasing ASP configuration device(s)
Info (209023): Programming device(s)
Info (209021): Performing CRC verification on device(s)
Error (209040): Can't access JTAG chain
Error (209027): Verification failed for device number 1
Error (209012): Operation failed
Info (209061): Ended Programmer operation at Wed Nov 25 17:52:22 2020



Giuseppe Marra

Posts 14
25 Nov 2020 17:36


I recognized now, that i have this problem only with 2.12
If I go back to 2.11 all works fine?
Somebody same experience?


Roy Gillotti

Posts 474
25 Nov 2020 17:53


If you can boot fine in 2.11 have you tried just doing a exe core update install from the Amiga shell?


Giuseppe Marra

Posts 14
25 Nov 2020 18:27


Yes i tried, and i got the same problem, like if i flash ober USB Blaster. It says flashing 100% successfull but it will not boot up.
Shpuld i add something in my CF? or change something?



Roy Gillotti

Posts 474
25 Nov 2020 19:18


Likely need to do the power modification to the capacitors on the V600.


Giuseppe Marra

Posts 14
26 Nov 2020 06:04


I solved it. The problem was I had to add the Setpatch in my startup sequence.


Angel Valdes

Posts 6
08 Feb 2021 03:33


I have a similar problem.
  I updated my 600v2 to gold2.12 using the USB Blaster successfully, but when restart, I get the vampire image with v2.12 at the bottom, but in the RGB I get nothing... it just stays there for ever. CF does not boot nor floppy.
 
  I go back to gold2.11, everything works fine.
  Please help!
 
  Note: how do you add the setpath in startup sequence when it does not even get to asking for floppy or tries to boot CF at all?
 
  Note: will the capacitors solution work or what about using a more powerful PSU? (I just ordered one)


Giuseppe Marra

Posts 14
08 Feb 2021 09:53


Look here.
http://wiki.apollo-accelerators.com/doku.php/os:amigaos:v3.9

posts 8