S. Snigelson
Posts 2 23 Mar 2022 15:09
| I bought a Vampire 500 V2+ in 2017. It worked fine, I used it for a while, but then put my Amiga away until late last year. Then it worked for a while, but suddenly stopped booting. Changing to a 68000 the Amiga works perfectly fine. Composite video stays black (but outputs sync), DIGITAL-VIDEO has no output at all. ACT led on the Vampire stays on for like half a second, then turns off (I have no clue if it's supposed to stay lit or not). Power LED comes on and it sounds like it's trying to boot from the floppy, but it sounds very weird (don't know how to describe it, but not how it usually sounds). No reaction on the caps lock key. I've measured some voltages and there is 1.2 V, 2.5 V and 3.3 V. I've tried flashing some different cores (2.12 x10 and x12, 2.13 x11 and 2.14) but no change. The Amiga and PSU are both recapped. Motherboard revision 5. Any ideas welcome.
|