Hi, I got a new Vampire 1200 from Relec. I am trying to flash to the latest core release using the Quartus software. I am getting an error: Started Programmer operation... Configuring device index 1 Device 1 contains JTAG ID code 0x020F50DD Configuration succeeded - 1 device(s) configured Can't recognize silicon ID for device 1. A device's silicon ID is different from its JTAG ID Operation failed Ended Programmer Any ideas? I am following the guide on the wiki. I have the USB blaster driver installed. I used this same USB blaster/cable to flash my Vampire 500 successfully... I tried R12 and R13 (for V1200 obviously) both give the same error. This is an Escom/AT A1200HD with 40MB drive installed. If I just try to boot with the vampire installed I either get a green screen or black screen. Card is pushed in all the way. I see a blue LED on the vampire and the "V" logo is lit up in red on the card itself. Card is revision 1.3. Thanks! Darren
|