|
---|
| | Michael Huck
Posts 50 18 Jan 2020 21:35
| Hi all Has anyone got links to DIGITAL-VIDEO panel mounts you used in your a600? I bought a couple but neither fit and I was wondering what others used. I have removed the ef modular so have some space inside the machine
| |
| | Duarte Olival
Posts 16 18 Jan 2020 21:47
| I used hot glue and it holds fine.
| |
| | Sean Sk
Posts 488 19 Jan 2020 02:18
| I used the following: https://www.thingiverse.com/thing:2147872 I screwed into it from underneath the motherboard using the existing holes originally used by the RF modulator. Drilled a couple of small pilot holes into the mount and used small screws used for plastics. I got it 3D printed for me (it was a real nice job) and used that same DIGITAL-VIDEO joiner pictured. Had to get an DIGITAL-VIDEO cable with really small ends in order for it to fit. It's very tight in there with those surface mounted capacitors just behind the mount.
| |
| | Michael Huck
Posts 50 19 Jan 2020 11:41
| Thanks for the response. Where did you pick up the cable?
| |
| | Roy Gillotti
Posts 517 19 Jan 2020 12:47
| @Sean SK Ah yeah I made that design, It was a quick and dirty 3D print, yes I agree the fitting with SMD capacitors is a bit tight. FWIW, the capacitors that get in the way are not needed anymore, they're related to the RF modulator circuitry. When I recapped my A600, I just didn't populate them.
| |
| | Michael Huck
Posts 50 19 Jan 2020 14:58
| Thanks for your work! I have ordered one from thingyverse :-)
| |
| | Sean Sk
Posts 488 20 Jan 2020 12:38
| Roy Gillotti wrote:
| @Sean SK Ah yeah I made that design, It was a quick and dirty 3D print, yes I agree the fitting with SMD capacitors is a bit tight. FWIW, the capacitors that get in the way are not needed anymore, they're related to the RF modulator circuitry. When I recapped my A600, I just didn't populate them.
|
First off, thanks a bunch Roy for that design, I really like it. For me, it was the best out of a few that I had considered. I had a couple of them printed at Shapeways and they came up really nice as I mentioned before. Thanks for the heads up on those caps. Yeah I suspected they probably weren't needed anymore but wasn't a 100 percent sure so I was a bit gutless in removing them just in case. :D
| |
| | Sean Sk
Posts 488 20 Jan 2020 12:43
| Michael Huck wrote:
| Thanks for the response. Where did you pick up the cable?
|
Hey mate. I basically got this one: https://www.ebay.co.uk/itm/ThinWire-Aluminium-DIGITAL-VIDEO-Cable-1m/142955398330?hash=item2148ce44ba:g:q8kAAOSwdOxd-oEA But I think I got a 50cm length.
| |
| | Michael Huck
Posts 50 29 Jan 2020 20:41
| I fitted it with the 3D print bracket and hot glue instead of a screw it works 👍
| |
| | Leo Foederer
Posts 27 30 Jan 2020 19:42
| I use this one: EXTERNAL LINK
| |
|