Overview Features Instructions Performance Forum Downloads Products OrderV4 Reseller Contact

Welcome to the Apollo Forum

This forum is for people interested in the APOLLO CPU.
Please read the forum usage manual.
VISIT APOLLO IRC CHANNEL



All TopicsNewsPerformanceGamesDemosApolloVampireAROSWorkbenchATARIReleases
Documentation about the Vampire hardware

SD Card Error 80

Fabien Briatte

Posts 9
25 Oct 2019 21:31


Hi,
   
    I'm trying to use SD card on my vampire SD port but everytime I got error 80 with SDDiag. I tried with 3 differents SD card brands formatted in Fat32 but always same error 80 :-(
 
  Here some photos
  EXTERNAL LINK 
  EXTERNAL LINK 
  EXTERNAL LINK   
  I don't see what is wrong


Kef Emzy

Posts 40
25 Oct 2019 21:43


Fabien Slug wrote:

Hi,
   
    I'm trying to use SD card on my vampire SD port but everytime I got error 80 with SDDiag. I tried with 3 differents SD card brands formatted in Fat32 but always same error 80 :-(
   
    Here some photos
    EXTERNAL LINK 
    EXTERNAL LINK 
    EXTERNAL LINK   
    I don't see what is wrong

Buffers should be 300+, not 20, but I doubt that is the problem. It should only affect speed.


Fabien Briatte

Posts 9
25 Oct 2019 21:45


I tested also with 'Buffers = 300' but still error 80 with SDDiag



Kef Emzy

Posts 40
25 Oct 2019 21:58


Fabien Briatte wrote:

  I tested also with 'Buffers = 300' but still error 80 with SDDiag
 
 

 
  Sorry mate, I don't know. This is the only info I could find.
 
  CLICK HERE 
Did you try to set the speed to slow using vcontrol?


Fabien Briatte

Posts 9
25 Oct 2019 22:11


Kef Emzy wrote:

 
    Sorry mate, I don't know. This is the only info I could find.
   
    CLICK HERE   

 
  Thanks for the link, they are talking about possible defective SD slot. I just found similar issue  on a French Amiga forum where 2 vampire owners had their SD port defective. Could be the reason on my Vamp ? :-(

EXTERNAL LINK 

 


Kef Emzy

Posts 40
25 Oct 2019 22:13


Yeah, could be. Did you try the vcontrol thingy?


Fabien Briatte

Posts 9
25 Oct 2019 22:18


"VControl SD=3"  in Startup-Sequence ?


Kef Emzy

Posts 40
25 Oct 2019 22:20


Yeah, try with "VControl SD=1"


Fabien Briatte

Posts 9
25 Oct 2019 22:27


tested both "VControl SD=1" and "VControl SD=3", SD Card is still unreadable and got error 80 in sddiag


Kef Emzy

Posts 40
25 Oct 2019 22:30


Fabien Briatte wrote:

  tested both "VControl SD=1" and "VControl SD=3", SD Card is still unreadable and got error 80 in sddiag
 

 
  Ok, then I would wait for an Apollo team member to help you. I don't have a Vampire at the moment so I am out of ideas. :(

Did you format the card on a pc btw?


Fabien Briatte

Posts 9
25 Oct 2019 22:42


Kef Emzy wrote:

  Did you format the card on a pc btw?

Yes I format the cards in Fat32 from my pc. No issue for reading them on PC.


Kef Emzy

Posts 40
25 Oct 2019 22:44


Fabien Briatte wrote:

Kef Emzy wrote:

 
  Did you format the card on a pc btw?
 

 
  Yes I format the cards in Fat32 from my pc. No issue for reading them on PC.

Ok, check back in a while. I'm sure a member of the apollo-team can help you. Good luck.

posts 12