Overview Features Coding ApolloOS Performance Forum Downloads Products Order Contact

Welcome to the Apollo Forum

This forum is for people interested in the APOLLO CPU.
Please read the forum usage manual.
Please visit our Apollo-Discord Server for support.



All TopicsNewsPerformanceGamesDemosApolloVampireAROSWorkbenchATARIReleases
Documentation about the Vampire hardware

Screws and Bolts for Vampire 600 V2

Stefano Briccolani

Posts 586
03 Aug 2018 19:14


I have lost the little screws and bolts to screw my kipper vampire 600 to the amiga mobo. So my vampire is a bit "floaty" (kipper's cpu socket is not the best in the world). Someone can suggest me some replacement screws (with bolts) that I can use in place of the original ones?



Leigh Russ

Posts 151
03 Aug 2018 22:12


M1.6x16mm is what you want. That's what Kipper supplied with them. Cheap to get on ebay


Stefano Briccolani

Posts 586
03 Aug 2018 23:03


When I search on ebay M1.6x16mm I find some kind of screws, but without the bolt to be screwed at the bottom of the motherboard. I think that kipper supplied the v600 with different spacers. Mine is an empty cylinder so the screw have to be blocked under the motherboard to keep the board tighten


Stefano Briccolani

Posts 586
04 Aug 2018 10:26


This is the screw. I need a bolt to tight to the mobo.
EXTERNAL LINK


Leigh Russ

Posts 151
05 Aug 2018 15:56


Just search for M1.6 nut.

Basically you need an M1.6 screw that is 16mm in length and a M1.6 nut to go with it


Stefano Briccolani

Posts 586
05 Aug 2018 16:52


Ok! Thank you.

posts 6