Claudio Guglielmotti (Apollo Team Member) Posts 185 30 Apr 2018 13:23
| you need to check if the jtag demon is running. Power on the amiga (if not, the usb blaster can't be detected). From the pc side, open a terminal and go in the drawer /qprogrammer/bin (it is in your home or in /opt) Execute the test program: > jtagconfig if you have an error (chain broken or something like that) try to start the demon, then run again the test program: > jtagd > jtagconfig if you still have issue, probably you need to add the altera rule for udev: > sudo nano /etc/udev/rules.d/51-altera-usb-blaster.rules and add this definition, then save and try again: ATTR{idVendor}=="09fb", ATTR{idProduct}=="6001", MODE="666"
|