The team will post updates and news about our project here |
|
---|
| | Martin Soerensen
Posts 232 14 May 2018 13:26
| Roger Simons wrote:
| I was using the 2,5 Amp PSU and I did find some stability issues. Switched to 4,5 Amp PSU, problems solved. I had some freezes and the screen would go black every now and than.
|
Could well be down to the voltage of the 5V rail being different on those two supplies. Having 4.8V inside the Amiga can mean a world of difference to only having 4.7V and that voltage is not necessarily related to the wattage of the PSU, but probably more down to component tolerances. A good 2.5A PSU should be powerful enough to run a Vampire system (I have a 2.5A standard PSU which can run my V600 machine just fine), provided there are no other power-hungry additions to that machine (a CF card is not power-hungry so that is fine :)).Marlon Beijer wrote:
|
Tim D wrote:
|
Gunnar von Boehn wrote:
| Getting new reliable PSU, like a RT65-B meanwhell would ensure a stable setup.
|
Thanks Gunnar! Is there an easy (meaning no soldering) way to connect this to an A500, i.e. is there some adapter cable available somewhere?
|
EXTERNAL LINK + cable from Amiga PSU
|
The Meanwell PSU is not an ATX PSU, so that adapter will not be of much use in this case.
| |
| | Marlon Beijer
Posts 182 14 May 2018 13:38
| Martin Soerensen wrote:
| The Meanwell PSU is not an ATX PSU, so that adapter will not be of much use in this case.
|
Ah, in that case, ignore what I wrote.
| |
| | T D
Posts 9 14 May 2018 20:30
| Thanks Martin, that seems doable, even for me :)
| |
|
|
|