Adam Whittaker (Needs Verification) Posts 270/ 1 06 May 2017 12:59
Hi I asked before about wanting to test but heard nothing back... I have a 600 with vampire 2 and would love to test gold 3 ide stuff, well any stuff really.
Peter Heginbotham
Posts 214 21 May 2017 15:28
Any Thoughts on the issue ?
Matthew Langtry
Posts 199 21 May 2017 16:19
Is this to only test ide or does include testing of aga through hdmi too?
David Wright
Posts 373 21 May 2017 17:17
Wouldn't it be all? I would also think testers would use a secondary boot cf card. Wouldn't want to mess with my main install in testing.
Peter Heginbotham
Posts 214 22 May 2017 13:07
Peter Heginbotham wrote:
RawSpeed Controller Performance Test
Standard EXTERNAL LINK FASTIDE ON EXTERNAL LINK With fastIDE when performing writes (extracting WHDload games) to SCSI 1 (CF Card) > SCSI 0 (mSATA) the system locks up and unable to read \ browse disks
Other Info Firmware GOLD 3 1b IDE Splitter KA-60 (http://retroami.com.pl/index.php?id_product=175&controller=product&id_lang=1) A604N + RTC + Indivision ECS
Any thoughts on how to fix this issue?
The hard drives are directly powered from a 90w geniune PicoPSU
There are no issues with data transfers when FASTIDE is not used. Test copying 650MB ISO and checking the MD5 hash
(Sorry for the double post i forgot to include the issue)
Gunnar von Boehn (Apollo Team Member) Posts 6254 22 May 2017 13:30
FASTIDE is on the A500 is simple ON/OFF switch.
On the A600 you will need to find the optimal "param" for your A600. Also please mind to use FASTIDE for a direct 1to1 connection to 1 CF. Never use it for CDROM or when you have 2 devices attached.
Peter Heginbotham
Posts 214 22 May 2017 13:41
I have GOLD 3 b1 for testing
Matthew Langtry
Posts 199 24 May 2017 19:20
did you have to sign nda on beta 3?
Peter Heginbotham
Posts 214 25 May 2017 11:21
No, just give your first born child or pop on to IRC and ask
Matthew Langtry
Posts 199 27 May 2017 22:11
ill wait for the beta testers find and help fix the bugs
Simo Koivukoski (Apollo Team Member) Posts 601 05 Nov 2017 16:20
RawSpeed Controller Performance Test has been updated to version 1.12: EXTERNAL LINK
V500 V2+ fastide:
Alex Cleak
Posts 21 05 Nov 2017 19:56
I use my V500 V2+ with a SATA to IDE bridge and a SATA 2.5" HDD. I get pretty good speeds already, but faster is always better! Looking forward to this :)
Jan Vonka
Posts 60 05 Nov 2017 20:13
Can you please make Syspeed Drive test as well?
Martin Soerensen
Posts 232 06 Nov 2017 07:05
I assume that graph is misleading since it maxes out at 4MB/s while the number on the right says 15MB/s.
Roger Shimada
Posts 30 06 Nov 2017 15:09
To get a 15058K/sec Transfer rate in 1720ms would require 25,900 bytes to be transferred.
I do not think that RawSpeed Controller 1.12 should be trusted.
Gunnar von Boehn (Apollo Team Member) Posts 6254 06 Nov 2017 15:16
Roger Shimada wrote:
To get a 15058K/sec Transfer rate in 1720ms would require 25,900 bytes to be transferred.
I do not think that RawSpeed Controller 1.12 should be trusted.
Double check your math!
Darkulla Vampire
Posts 33 06 Nov 2017 20:39
With sysinfo or other benchmarks, the speed on my A500+ v2+ gold2.5 is: ~15mb/s on raw data read.
I can testing with a four ide splitter, if you Want?
Michael Nurney
Posts 283 07 Nov 2017 14:00
I'll try it :)
IRC on the way
Sebastian Blanco
Posts 148 07 Nov 2017 15:34
I have question about the speed for example. On my vampire 500+ using 2.5 core i see read speed of 3 MB/S from my CF card look quite fast for me. This is the standard speed, or it should be faster ?.
Jan Vonka
Posts 60 07 Nov 2017 15:48
Use Vampiretool (http://wiki.apollo-accelerators.com/doku.php/vampiretool) and enable FASTIDE.
The team will post updates and news about our project here
