|
---|
| | Krzysztof AT
Posts 48 16 Jan 2020 21:40
| I just have checked. Both options change nothing. If I choose any RTG resolution and even test it i have "no signal" Little update: I have connected another monitor BenQ bl912. When i tested resolution 800x600 i had test screen. When I have changed it to 1024x768 shows nothing, if i get back 800x600 also got nothing and i Can't force it to show something anymore.
| |
| | Simo Koivukoski (Apollo Team Member) Posts 601 17 Jan 2020 05:36
| r7258x12 core for Vampire 1200 V2 Gold2.12RC3: - Data cache size increased from 32K to 64K. - Improved long-word write speed into Amiga chip RAM. EXTERNAL LINK
| |
| | Simo Koivukoski (Apollo Team Member) Posts 601 17 Jan 2020 07:04
| Krzysztof AT wrote:
| When I have changed it to 1024x768 shows nothing, if i get back 800x600 also got nothing |
Not easy to say from where your issue comes. You could double check the cabling or test with the hdmi amplifier ( EXTERNAL LINK ). You could also try to fine tune your screenmodes with Picasso96mode program. Use some program to get correct initial values where to start adjusting, e.g. CVT 1.2 ( EXTERNAL LINK ). You can enable also Overclock -tooltype in Monitor icon, if needed.
| |
| | Peter Heginbotham
Posts 214 17 Jan 2020 10:05
| Simo Koivukoski wrote:
| r7258x12 core for Vampire 1200 V2 Gold2.12RC3: - Data cache size increased from 32K to 64K. - Improved long-word write speed into Amiga chip RAM. EXTERNAL LINK |
Are these changes in the current V500 or V600 2.12R3 release
| |
| | Nixus Minimax
Posts 416 17 Jan 2020 11:23
| Peter Heginbotham wrote:
|
Simo Koivukoski wrote:
| r7258x12 core for Vampire 1200 V2 Gold2.12RC3: - Data cache size increased from 32K to 64K. - Improved long-word write speed into Amiga chip RAM. EXTERNAL LINK |
Are these changes in the current V500 or V600 2.12R3 release
|
No, they can't. The increased cache size just doesn't fit the smaller FPGAs used in the V500 and V600. The improved long-word write speed is only possible on a 32 bit chipmem bus. The only Amigas with a 32 bit chipmem bus are the A1200, the A3000 and the A4000.
| |
| | Simo Koivukoski (Apollo Team Member) Posts 601 17 Jan 2020 11:26
| Yes, these things are only possible with the V1200 hardware.
| |
| | Krzysztof AT
Posts 48 17 Jan 2020 14:41
| Simo Koivukoski wrote:
|
Krzysztof AT wrote:
| When I have changed it to 1024x768 shows nothing, if i get back 800x600 also got nothing |
Not easy to say from where your issue comes. You could double check the cabling or test with the hdmi amplifier ( EXTERNAL LINK ). You could also try to fine tune your screenmodes with Picasso96mode program. Use some program to get correct initial values where to start adjusting, e.g. CVT 1.2 ( EXTERNAL LINK ). You can enable also Overclock -tooltype in Monitor icon, if needed.
|
I have already tried to use picasso96mode with no result. Cables are ok for sure because all is working fine under 2.11 core. Thanks for your support Simo. I think I'm going to wait for final core version and then will try one more time.
| |
| | Peter Heginbotham
Posts 214 17 Jan 2020 18:23
| Krzysztof AT wrote:
|
Simo Koivukoski wrote:
| Krzysztof AT wrote:
| When I have changed it to 1024x768 shows nothing, if i get back 800x600 also got nothing |
Not easy to say from where your issue comes. You could double check the cabling or test with the hdmi amplifier ( EXTERNAL LINK ). You could also try to fine tune your screenmodes with Picasso96mode program. Use some program to get correct initial values where to start adjusting, e.g. CVT 1.2 ( EXTERNAL LINK ). You can enable also Overclock -tooltype in Monitor icon, if needed. |
I have already tried to use picasso96mode with no result. Cables are ok for sure because all is working fine under 2.11 core. Thanks for your support Simo. I think I'm going to wait for final core version and then will try one more time.
|
Have you reinstall the SAGA driver 1.7.1 and installed for the 2.12 core?
| |
| | Krzysztof AT
Posts 48 17 Jan 2020 18:54
| I have installed SAGA 1.7.1 some time ago and didn't reinstall it after core update. I didn't think that should help.
| |
| | Peter Heginbotham
Posts 214 17 Jan 2020 19:19
| There is a step to select the core version
| |
| | Krzysztof AT
Posts 48 17 Jan 2020 20:36
| Ok. That could be helpfull:-) Will try it.
| |
| | Stefano Briccolani
Posts 586 18 Jan 2020 08:28
| @Simo: latest v1200 x12 core works very well in my a1200. Any idea when pcmcia support will be included?
| |
| | Ralf P
Posts 5 18 Jan 2020 13:45
| Hello, got my V1200 yesterday. now i wonder how i can make a backup from original 2.11 core to switch back with usb-blaster if an update is unstable on my card?greetings RalfP
| |
| | Simo Koivukoski (Apollo Team Member) Posts 601 18 Jan 2020 14:42
| Ralf P wrote:
| now i wonder how i can make a backup from original 2.11 core to switch back with usb-blaster if an update is unstable on my card? |
Backup is not possible, but you can download it from Apollo Accelerators Wiki: https://wiki.apollo-accelerators.com/doku.php/vampire:v1200-v2:updates
| |
| | Ralf P
Posts 5 18 Jan 2020 16:32
| thanks... this is what i looked for....
| |
| | Krzysztof AT
Posts 48 18 Jan 2020 23:38
| Peter Heginbotham wrote:
|
Krzysztof AT wrote:
| Simo Koivukoski wrote:
| Krzysztof AT wrote:
| When I have changed it to 1024x768 shows nothing, if i get back 800x600 also got nothing |
Not easy to say from where your issue comes. You could double check the cabling or test with the hdmi amplifier ( EXTERNAL LINK ). You could also try to fine tune your screenmodes with Picasso96mode program. Use some program to get correct initial values where to start adjusting, e.g. CVT 1.2 ( EXTERNAL LINK ). You can enable also Overclock -tooltype in Monitor icon, if needed. |
I have already tried to use picasso96mode with no result. Cables are ok for sure because all is working fine under 2.11 core. Thanks for your support Simo. I think I'm going to wait for final core version and then will try one more time. |
Have you reinstall the SAGA driver 1.7.1 and installed for the 2.12 core?
|
Nope, it's not that. I also checked installer script. Looks like in that part installer only copy "vampiregfx.card" in version for 2.11 or 2.12. I have already tried with both by copying it manually..
| |
| | Simo Koivukoski (Apollo Team Member) Posts 601 19 Jan 2020 10:52
| You should use vampiregfx.card 1.29 (01.01.20) with Gold212RC3 from its package: EXTERNAL LINK
| |
| | Krzysztof AT
Posts 48 19 Jan 2020 11:02
| Yes. I have used that when i upgraded 2.12 for a first time.
| |
| | Vojin Vidanovic (Needs Verification) Posts 1916/ 1 23 Jan 2020 14:08
| Simo Koivukoski wrote:
| |
Simo, Can you please add new FAQ entry - P96 screenmode and transfer the magic?
| |
| | Francesco Lemmi
Posts 58 24 Jan 2020 23:09
| Simo Koivukoski wrote:
| r7258x12 core for Vampire 1200 V2 Gold2.12RC3: - Data cache size increased from 32K to 64K. - Improved long-word write speed into Amiga chip RAM. EXTERNAL LINK |
Does this core disable the clock port on the A1200 motherboard? A couple of italian guys after having installed it had their rtc module not working anymore. My V1200 still has the original cora and the rtc is working properly.
| |
|